The coefficient of viscosity (η) of a liquid is given by Poiseuille's formula: F = η A (dv/dx), where F is force, A is area, dv/dx is velocity gradient. What are the dimensions of η?

Modified Question: A physical quantity has dimensions [M^x L^y T^z]. If this quantity is proportional to mass, the square of velocity and inversely proportional to length, what is the relation between x, y, z?

A physical quantity has dimensions [M^x L^y T^z]. If this quantity is proportional to the square of velocity and inversely proportional to length, what is the relation between x, y, z?

Modified Question: The dimensions of the quantity (electric charge)² / (permittivity * energy * length) are equivalent to the dimensions of:

The dimensions of the quantity (electric charge)² / (permittivity * length * force) are equivalent to the dimensions of:

If the atmospheric pressure is 1.013 x 10⁵ Pa, and density of mercury is 13600 kg/m³, and g = 9.8 m/s². What height of mercury column would correspond to this pressure? Express with appropriate significant figures.

Why are SI prefixes (like kilo, milli, micro) important in scientific notation?

Two forces F1 = (100 ± 5) N and F2 = (50 ± 2) N are acting on a body. What is the minimum resultant force with its error limits, if they act in opposite directions?

Modified Question: What are the dimensions of the ratio of molar heat capacity to specific heat capacity?

What are the dimensions of the ratio of specific heat capacity to molar heat capacity?

A physical quantity P is found to be dependent on quantities x, y, and z as P = x + y²/z. If x is length, y is velocity, and z is acceleration, is the formula dimensionally consistent?

When using a meter scale, which has divisions of 1 mm, what is the best way to record a measurement of 15.6 cm with correct uncertainty?

If the speed of light (c), Planck's constant (h), and Gravitational constant (G) are chosen as fundamental units, what are the dimensions of length in this new system?

Modified Question: A quantity Q is given by Q = I² R, where I is current, R is resistance. What are the dimensions of Q?

A quantity Q is given by Q = (I² R) / t, where I is current, R is resistance, and t is time. What are the dimensions of Q?

Which of the following quantities is expressed in the correct SI unit?

What are the dimensions of the gravitational constant G?

A student measures the diameter of a cylinder three times: 2.34 cm, 2.36 cm, 2.35 cm. The instrument used has a least count of 0.01 cm. What is the average diameter and the absolute error?

If the smallest division on the main scale of a Vernier caliper is 1 mm and 20 Vernier scale divisions (VSD) coincide with 19 main scale divisions (MSD), what is the least count?

In a system of units, if force (F), acceleration (A), and time (T) are taken as fundamental units, then the dimensions of energy would be:

Assertion (A): The measurement 4.00 g has more significant figures than 4.0 g. Reason (R): Trailing zeros after a decimal point are always significant.

Which pair of physical quantities has the same dimensions as Angular Momentum?

If the length of a rod is measured as (2.00 ± 0.02) m, what is the fractional error in its measurement?

What is the difference between accuracy and precision in measurement?

The velocity of water waves (v) may depend on their wavelength (λ), density of water (ρ), and acceleration due to gravity (g). Which of the following relations is dimensionally correct?

Which of the following is not a use of dimensional analysis?

The length of a simple pendulum is increased by 21%. What is the percentage increase in its time period? (Assume small angles of oscillation).

If a physical quantity has units of kg m s^-2, what is it likely to represent?

What are the dimensions of the quantity (E/V²), where E is energy and V is volume?

When two quantities are multiplied, what is the rule for determining the number of significant figures in the result?

Why is the least count of an instrument crucial for accurate measurements?

Which pair of physical quantities has different dimensions?

The frequency of a wave is given by f = (1/T), where T is the time period. If the percentage error in measuring T is 2%, what is the percentage error in f?

How is the SI unit of mass (kilogram) currently defined?

The electric field (E) and magnetic field (B) are related by c = E/B, where c is the speed of light. If the dimensions of E are [M L T^-3 A^-1], what are the dimensions of B?

What is the SI unit of luminous intensity?

What is the main limitation of using dimensional analysis to derive physical relations?

A student uses a stopwatch that measures time to 0.1 second. If the student measures a time period of 20.0 seconds, what is the relative error in the measurement?

Which of the following statements about significant figures is incorrect?

A physical quantity X is given by X = F v² / L, where F is force, v is velocity, and L is length. What are the dimensions of X?

Which of the following physical quantities has the dimensions of [M L^-1 T^-1]?

The least count of a screw gauge is 0.01 mm, and there are 100 divisions on its circular scale. What is the pitch of the screw gauge?

Why are base quantities in the SI system chosen to be independent of each other?

What are the dimensions of Planck's constant (h)? (Hint: E = hf, where E is energy and f is frequency).

A temperature sensor is found to consistently read 2°C lower than the actual temperature. If it reads 25°C, what is the actual temperature? What kind of error is this?

What are the dimensions of the ratio of angular momentum to linear momentum?

Why is it crucial to specify units when stating a physical quantity?

Express the number 0.00000000016 m in scientific notation with two significant figures.

The Rydberg constant (R_H) in spectroscopy has the same dimensions as which of the following?

Which of the following units is derived in the CGS system?

The mass of a substance is measured as (50.0 ± 0.1) g and its volume as (10.0 ± 0.2) cm³. What is the maximum percentage error in the measurement of its density?

What are the dimensions of surface tension (Force per unit length)?

A sphere has a radius of 2.1 cm. Calculate its surface area and express it with appropriate significant figures. (Use π = 3.14)

Why is 'mole' a fundamental quantity in the SI system, rather than just using 'number of atoms/molecules'?

What are the dimensions of the Universal Gas Constant 'R'? (Hint: PV = nRT, where P is pressure, V is volume, n is number of moles, T is temperature).

In an experiment to determine the acceleration due to gravity (g) using a simple pendulum, the formula used is T = 2π√(L/g). If the percentage error in the measurement of length (L) is 2% and in the time period (T) is 1%, what is the maximum percentage error in the calculated value of g?

A force of 1 dyne (CGS unit) is equivalent to how many Newtons (SI unit)?

Assertion (A): The unit of energy in SI is Joule. Reason (R): Energy is a derived quantity, and its unit is derived from fundamental SI units.

The dimensions of impulse are the same as the dimensions of which of the following physical quantities?

How many significant figures are there in 5.00 x 10³ g?

A length is measured using a meter scale (least count 1 mm) as 4.7 cm. The percentage error in this measurement is approximately:

What does it mean for a system of units to be 'coherent'?

Snell's Law states n₁ sinθ₁ = n₂ sinθ₂. What are the dimensions of the refractive index 'n'?

A weighing machine gives a reading of 50.0 kg for a person whose actual weight is 52.5 kg. If the machine consistently reads 50.0 kg for this person, which statement is true about the machine's measurements?

What are the dimensions of magnetic permeability (μ₀)? (Hint: From Ampere's law or Force between two parallel current-carrying wires F/L = (μ₀ I1 I2) / (2πd))

Two resistances R1 = (100 ± 3) Ω and R2 = (150 ± 2) Ω are connected in series. What is the equivalent resistance with error limits?

If Energy (E), Velocity (V), and Time (T) are chosen as fundamental quantities, what are the dimensions of the spring constant (k) in this new system? (Hint: k = Force/length)

Round off the number 18.350 to three significant figures.

A physical quantity P is related to four observables a, b, c and d as P = (a³ b²) / (sqrt(c) d). The percentage errors of measurement in a, b, c and d are 1%, 3%, 4% and 2% respectively. What is the percentage error in P?

What are the dimensions of energy density (energy per unit volume)?

Which of the following units is used to measure astronomical distances?

A student measures the diameter of a wire using a screw gauge. The main scale reading is 2 mm, circular scale reading is 35 divisions. If the screw gauge has a pitch of 1 mm and 100 divisions on the circular scale, and it has a positive zero error of 5 divisions, what is the corrected diameter of the wire?

A formula for the angular frequency (ω) of a spring-mass system is given by ω = sqrt(k/m), where k is the spring constant and m is the mass. Check its dimensional correctness. (Spring constant k has dimensions of Force/length).

How many significant figures are there in the measurement 0.005070 g?

Why is the SI system of units preferred globally over other systems like CGS or FPS?

In a new system of units, the unit of mass is 'a' kg, length is 'b' m, and time is 'c' s. What will be the magnitude of a force of 1 N in this new system?

The length of a cylinder is measured as (4.50 ± 0.05) cm and its diameter as (2.20 ± 0.01) cm. Calculate the percentage error in its volume.

The velocity 'v' of a particle is given by v = at + b/(t+c), where t is time. What are the dimensions of a, b, and c?

Why is electric current considered a fundamental quantity, even though it can be defined in terms of charge and time (I = Q/t)?

Assertion (A): The equation for the range of a projectile, R = (u² sin 2θ)/g, is dimensionally correct. Reason (R): Dimensional analysis can confirm if a physical relation is exactly correct.

A Vernier caliper has 10 divisions on its Vernier scale, which coincide with 9 divisions on the main scale. If each main scale division (MSD) is 1 mm, what is the least count of the instrument?

Given that 1 calorie = 4.18 J, and 1 J = 10⁷ erg. If the value of G in CGS system is 6.67 x 10^-8 dyne cm² g^-2, convert it to SI units.

Add the following measurements and express the result with the correct number of significant figures: 2.3 cm, 1.25 cm, and 0.087 cm.

How many picometers are there in 1 micrometer?

Check the dimensional consistency of the equation v² = u² + 2as, where v is final velocity, u is initial velocity, a is acceleration, and s is displacement.

If the radius of a sphere is measured with a percentage error of 1%, what is the percentage error in its volume?

A student measures the length of a rod three times and gets values 2.50 cm, 2.51 cm, and 2.49 cm. The actual length of the rod is 2.80 cm. Comment on the accuracy and precision of the measurements.

Which of the following is NOT a fundamental SI unit?

Why can dimensional analysis not determine dimensionless constants like 1/2 or π in an equation?

The frequency (f) of vibration of a string depends on its length (l), tension (T), and mass per unit length (m). Using dimensional analysis, find the relation for the frequency.

The length and breadth of a rectangle are (1.50 ± 0.01) m and (1.25 ± 0.02) m respectively. Calculate the area of the rectangle and express it with appropriate significant figures.

The percentage error in the measurement of mass and speed are 2% and 3% respectively. What will be the maximum percentage error in the estimation of kinetic energy obtained by measuring mass and speed?

A gas equation is given by P + (a/V²) * (V-b) = RT. What are the dimensions of the constant 'a'?

Okay, that's 50 questions now, avoiding duplicates, and following all rules.The escape velocity (v) of a body from a planet depends on the acceleration due to gravity (g) on its surface and the radius (R) of the planet. Derive the relation for escape velocity using dimensional analysis.

What is the basic difference between a fundamental unit and a derived unit in the SI system?

A physical quantity Q is given by Q = (A² B³) / (C√D). If the percentage errors in the measurements of A, B, C, and D are 1%, 2%, 3%, and 4% respectively, what is the maximum percentage error in Q?

Let's use the explicit result for g from the problem calculation: g = 4 * 9.87 * (0.55 / (1.50)²) = 9.65 m/s². Let's choose option A, and modify the calculated g to 9.63 for coherence.

A student performs an experiment to measure acceleration due to gravity (g) using a simple pendulum. They record a time period T = (1.50 ± 0.05) s and length L = (0.55 ± 0.02) m. Using the formula g = 4π²L/T², calculate the value of g and its absolute error. (Take π² ≈ 9.87).

Explain why an ideal standard of measurement should possess the properties of invariance and accessibility.

Which of the following physical quantities is dimensionless?

A physical quantity P is related to four observables a, b, c, and d as P = a³ b² / (√c * d). The percentage errors in the measurements of a, b, c, and d are 1%, 3%, 4%, and 2% respectively. What is the maximum percentage error in P?

The dimensions of electric potential (V) are [M L² T^-3 A^-1]. What are the dimensions of resistance (R) if V = IR, where I is current (Ampere)?

Why is it generally recommended to take multiple readings and calculate the mean when performing a scientific measurement?

The radius of a solid sphere is measured to be R = (6.0 ± 0.2) cm. Calculate the maximum percentage error in the volume of the sphere.

The age of the universe is estimated to be approximately 13.8 billion years. Express this age in seconds, and determine its order of magnitude. (Assume 1 year ≈ 3.156 x 10⁷ seconds).

Consider the equation: v = a t + b x² + c / t, where v is velocity, t is time, x is displacement. Determine which terms are dimensionally consistent if any.

How many significant figures are present in the number 500.0?

Surface tension (S) is defined as force per unit length. What are its dimensions?

Why is it impossible to measure the exact length of an object, and what does the "least count" of an instrument represent in this context?

Express the SI derived unit of Pressure (Pascal) in terms of SI base units.

If voltage V = (100 ± 5) V and current I = (10 ± 0.2) A, what is the percentage error in the measurement of resistance R = V/I?

A screw gauge has a pitch of 0.5 mm and 50 divisions on its circular scale. When the jaws are closed, the zero of the circular scale is below the main line, and the 5th division coincides with the main line. When a wire is measured, the main scale reading is 4 mm and the 30th division of the circular scale coincides. What is the correct diameter of the wire?

What are two major limitations of dimensional analysis in deriving or checking physical equations?

An equation for the velocity of a particle is given by v = At + B/t + C t². If v is in m/s and t is in seconds, what are the units of A, B, and C?

Express the number 0.00000000450 in scientific notation with the correct number of significant figures.

Explain the difference between absolute error and relative error in a measurement. Why is relative error often more informative?

The speed of light (c) in a medium is given by 1/√(με), where μ is permeability and ε is permittivity. If μ has dimensions [M L T^-2 A^-2] and ε has dimensions [M^-1 L^-3 T⁴ A²], verify if this formula is dimensionally consistent.

Many derived SI units are named after scientists. Give an example of a derived unit, state the physical quantity it measures, and the scientist it honors.

Assertion (A): All zeros between two non-zero digits are significant. Reason (R): For a number without a decimal point, trailing zeros are not significant.

The measured radius of a circle is 10.0 cm with an absolute error of 0.1 cm. What is the percentage error in the calculated area of the circle?

The Boltzmann constant (k_B) relates the average kinetic energy of particles in a gas to the absolute temperature. What are its dimensions?

Why is the definition of the meter now based on the speed of light, and the kilogram on Planck's constant, instead of physical artifacts?

Round off the number 18.355 to three significant figures.

What are the dimensions of the universal gravitational constant (G) from Newton's law of gravitation F = G (m1 m2) / r²?

List three pairs of physical quantities where one is a fundamental quantity and the other is a derived quantity, but both relate to a similar concept.

Why are atomic clocks considered the most accurate time-keeping devices, and what fundamental property do they utilize?

Check the dimensional correctness of the equation for the range of a projectile: R = (u² sin(2θ)) / g, where u is initial velocity, θ is angle, g is acceleration due to gravity.

The length and breadth of a rectangle are (15.3 ± 0.1) cm and (12.8 ± 0.2) cm, respectively. Calculate the perimeter of the rectangle with the appropriate error limits.

A vernier caliper has 20 divisions on its vernier scale, which coincide with 19 divisions of the main scale. If one main scale division is 0.5 mm, what is the least count of the instrument and the reading if MSR is 10.0 mm and VSC is 15?

Differentiate between random errors and systematic errors, providing one example for each.

Why is an Angstrom (Å) unit often used to express atomic radii, instead of nanometers (nm) or picometers (pm)?

How many significant figures are there in the measurement 0.005070 meters?

Assertion (A): The SI unit of electric current is Ampere. Reason (R): Ampere is a fundamental unit in the SI system.

If the measurement of length 'L' has a percentage error of X%, what is the percentage error in the measurement of √(L)?

The magnetic permeability (μ) is given by the relation B = μH, where B is magnetic field strength (Tesla) and H is magnetic intensity (Ampere/meter). What are the dimensions of magnetic permeability?

A digital thermometer gives readings of 36.5°C, 36.5°C, 36.4°C, 36.6°C for a body whose actual temperature is 37.0°C. Another mercury thermometer gives readings of 37.1°C, 37.2°C, 37.0°C, 37.1°C. Compare the precision and accuracy of the two thermometers.

During an experiment, a student consistently reads the scale from an angle, leading to readings that are always higher than the actual value. What type of error is this?

A screw gauge has 100 divisions on its circular scale and its pitch is 1 mm. When a wire is placed between the jaws, the main scale reading is 2 mm and the 45th division of the circular scale coincides with the main line. What is the diameter of the wire?

A student uses a vernier caliper to measure the diameter of a sphere. The main scale reading is 3.4 cm, and the vernier scale coincides with the 6th division. If the vernier scale has 10 divisions that coincide with 9 divisions of the main scale, and each main scale division is 1 mm, what is the diameter of the sphere?

Estimate the order of magnitude of the number of red blood cells in the human body, given that an average adult has about 5 liters of blood and approximately 5 x 10⁶ red blood cells per microliter of blood.

If force (F), acceleration (A), and time (T) are chosen as the fundamental units, what is the dimension of energy in this system?

If the units of length, mass, and time are each doubled, how does the unit of power change?

The mass of a block is (500.0 ± 0.5) g and its volume is (25.0 ± 0.2) cm³. What is the maximum percentage error in the measurement of its density?

A typical atomic nucleus has a radius of about 1 fermi (fm). Express this radius in meters using appropriate SI prefix notation for very small lengths.

To measure the distance to a nearby star using the parallax method, observations are made six months apart. Why is this specific time interval chosen?

A common physics equation is given as E = mc². If a student mistakenly writes E = mc³, how would dimensional analysis reveal this error?

A student measures the length of a rod four times and obtains the readings: 12.3 cm, 12.35 cm, 12.28 cm, and 12.32 cm. The actual length of the rod is 12.30 cm. Comment on the precision and accuracy of these measurements.

Why is 'mole' considered a fundamental quantity in the SI system, distinct from mass, even though it relates to the amount of substance?

The distance to a star is measured to be 4.25 light-years. If 1 light-year = 9.46 x 10¹5 m, what is this distance in kilometers?

Which of the following pairs of physical quantities has the same dimensions?

When 3.456 m, 2.3 m, and 123.45 m are added, what is the sum rounded to the correct number of significant figures?

The period of oscillation of a simple pendulum is given by T = 2π√(L/g). If the percentage error in the measurement of length (L) is 2% and that in the acceleration due to gravity (g) is 3%, what is the maximum percentage error in the measurement of the time period (T)?

The escape velocity (v) of a body from a planet depends on the acceleration due to gravity (g) on its surface and the radius (R) of the planet. Derive the relation for escape velocity using dimensional analysis.